Home
  About Us
  Garden Buildings
  Sheds
  Summer Houses
  Play Houses
  Animal Housing
  Dog Kennels
  Cat Housing
  Poultry Housing
  Aviaries & Runs
  Rabbit/Ferret Housing
  Bespoke Designs
  Starter Kits
  Full Price List
  Contact Us
   
 
  Apex Dog Kennel
This is a standard style of kennel, but with a difference. As with most of our designs, we try to make cleaning as easy as possible – so the Apex Kennel has unique easy clean features such as the side opening access doors. These are standard on all four sizes of kennel we offer, along with standard dog access and raised legs to give good air circulation underneath.

 
 

 
SPECIFICATIONS:-

• 12mm redwood T&G cladding
• 9mm Hardwood Exterior Ply to Floor
• Heavy duty green mineral felt to roof
• Edging strips to corners of kennel and to felt for quality finish
• Raised off the ground for damp prevention and ventilation
• Weather Protective Ridge
• Rain water edging strip to dog access

OPTIONS
• Double Layered Ply & T&G timber roof
• 20mm Redwood Finish
• Higher legs with ramp
• Larger kennel can be split internally with access either end

 
 
Pent Dog Kennel
The Pent Kennel stands between 3.5ft and 5ft high (depending on the size ordered). The Kennel unit is raised on legs with a full sized access door on the front for the keeper, sliding adjustable ventilation hatch for those hot summer nights. There is a sliding pophole (sized for the dog) leading into the run area. Internally, there is a raised bed which is sanded to a smooth finish with space for beanie bags or blankets both on top and underneath. The RUN area has 1ft high draught boards all around, a full sized access door on either the front or end panel (to customer requirement). The Run area is fully covered in robust 12mm sterling board roofing with heavy duty green mineral felt. (Larger kennels can have two raised beds for more than one dog, or alternatively a King Sized bed area for happy pooches to snuggle up together!).
 
 


 
internal view of raised bed area
 
 
SPECIFICATIONS:-
• 12mm redwood T&G cladding
• 9mm Hardwood Exterior Ply to Floor
• Heavy duty green mineral felt to roof
• Edging strips to corners of kennel and to felt for quality finish
• Kennel raised off the ground for damp prevention & ventilation
• 1ft high Draught Boards all round
• Heavy Duty 10 Gauge galvanised Weldmesh 2”x 2” as standard
• Fully Covered run area
• Wired inside-out to prevent chewing
• Galvanised Fixings throughout

OPTIONS
• 20mm Redwood Finish
• King Sized raised bed or two separate beds in Larger Kennels
• All sizes available